Straight answers on cost, safety and local conditions, written by the people who do the work.
Fastest: call (833) 490-5225. Or send this and we call you back.
Updated October 7, 2026 · 15 min read
Mitigating one room of clean water damage in Dallas typically runs $1,200 to $4,000, gray water $2,500 to $6,500, and a flooded slab first floor $3,000 to $12,000. Sewage and large mold jobs sit higher. These are working estimates for Dallas County in 2026, and the emergency-stage price is approved before work starts.
Updated October 7, 2026 · 14 min read
North Texas pipes burst because hard freezes are rare here and houses are built for heat: supply lines run through vented attics, garage walls and brick veneer. Most leaks begin on the thaw, not during the cold. Shut the main valve, call a Texas-licensed plumber for the pipe, and start drying wet materials right away, since the EPA's guideline is 24 to 48 hours.
Updated October 7, 2026 · 14 min read
A slab leak is a break in a water or drain line buried under a slab-on-grade foundation. In Dallas the signs are a meter that moves with every tap closed, a warm patch of floor, damp or cupping flooring, a musty smell in a cabinet, and a bill that climbs for no reason. A Texas-licensed plumber locates and repairs it.
Updated October 7, 2026 · 13 min read
Texas homeowners policies generally cover water damage that is sudden and accidental, such as a burst pipe, a toilet overflow or a broken washing-machine hose. They generally do not cover gradual leaks, flood, or sewer and drain backup without an added endorsement. Only your insurer can decide a claim under your own policy.
Updated October 7, 2026 · 13 min read
Hail seldom soaks a house on the day it falls. It bruises and cracks shingles, and the leak arrives with the next long, wind-driven rain, often weeks later, as a ceiling stain or wet attic insulation. Photograph the damage, cover the opening, and get the wet materials dried quickly, because mold needs moisture to grow.
Updated October 7, 2026 · 14 min read
Texas licenses mold work through TDLR. Below 25 contiguous square feet of affected area no mold license is required, and at 25 or more a licensed assessor writes the protocol while a separate licensed contractor carries it out. Drying wet materials quickly, in line with the EPA's 24 to 48 hour guideline, improves the odds of staying out of all of it, though it cannot promise you will.
Updated October 7, 2026 · 15 min read
Water that came in from outside is treated as grossly contaminated, so flash flood cleanup is removal and cleaning first and drying second. Get power and gas checked, photograph every room before you touch anything, then get the porous materials out. A standard Texas homeowners policy almost never covers flood.
Updated October 7, 2026 · 13 min read
A slab house spreads water sideways across the floor and wicks it up the drywall, where it hides under tile, pad and cabinet bases. A pier-and-beam house lets water fall into the crawl space, where it soaks subfloor, joists and insulation. Almost no Dallas home has a basement, so those are the two stories.
A crew is dispatched as fast as one is available, and you approve the estimate before any work starts.